Page 2 of 82
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 7:54 pm
by amd is the best
pilihp2 wrote:yeah, the rear diff mounts to the control arms in some sort of way from what I Remember
I probably should have just went down to the car and checked it out. I just get click happy and order lots of stuff. Thank you again, I just email them to have those removed from my order.
Just need a huge turbo now!
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 9:03 pm
by JonathanL
Clean.
BTW do want that steering wheel.
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 9:44 pm
by loxxrider
hurry up and get that turbo, you won't regret it
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 9:46 pm
by amd is the best
JonathanL wrote:Clean.
BTW do want that steering wheel.
Thanks man! What steering wheel?
loxxrider wrote:hurry up and get that turbo, you won't regret it
I decided I'm prob going to run the GTX3076r. I'm shooting to have it done for Carlisle this year, we'll see. I still need to fix my S4.
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 9:52 pm
by loxxrider
awesome, can't wait to see it done. I sure hope I can make it too!
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 9:58 pm
by amd is the best
loxxrider wrote:awesome, can't wait to see it done. I sure hope I can make it too!
You and me both man! I'm going to have an equal length manifold built as well. Go big or go home for the 200
. When is Carlisle this year? Do you stay for the weekend? It'd be awesome to meet up!
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 10:02 pm
by loxxrider
Yeah, that would indeed be great. I totally forget, but have you or are you doing internals?
Not sure on the exact date of Carlisle, but there is a thread here that has it. Its sometime in late may though. Last year I arrived Friday and stayed until Sunday. It really is an awesome time.
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 10:19 pm
by 200 Avant
Love the car.. super nice and the stance is great too.
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 10:19 pm
by amd is the best
loxxrider wrote:Yeah, that would indeed be great. I totally forget, but have you or are you doing internals?
Not sure on the exact date of Carlisle, but there is a thread here that has it. Its sometime in late may though. Last year I arrived Friday and stayed until Sunday. It really is an awesome time.
Internals are stock and I plan on keeping them that way until next winter. Then just a set of rods, new bearings, head studs and build the head. Keep it fairly simple as ~400awhp is my goal. I want it to be pretty much as fast as my B5 and I'll be happy.
I'll look up the date and request the time off (if needed) for that weekend. Seems like a better meet for old school Audi's. I have brought the 200 to H2O the last two years and I feel like it doesn't get the appreciation is deserves at a show like that. Has to be ridiculously slammed to the ground with some baller ass wheels to be cool. Carlisle seems like it caters more to the older models. So the 200 will be going there and I'll take the TDI to H2O.
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 10:34 pm
by pilihp2
amd is the best wrote:[/quote]
pilihp2 wrote:yeah, the rear diff mounts to the control arms in some sort of way from what I Remember
I probably should have just went down to the car and checked it out. I just get click happy and order lots of stuff. Thank you again, I just email them to have those removed from my order.
Just need a huge turbo now![/quote]
hahaha. I know how that is.
I've got parts sitting around that I ordered almost a year ago.
"oh I gotta have that, that should be replaced, oh don't I need one of those?"
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 10:38 pm
by JonathanL
amd is the best wrote:[/quote]
Found this on ebay UK and had to buy it (pic installed in my car):
[/quote]
This one I been wantin to get one of these before theyre all gone.
Re: AMD's 91 200q Project
Posted: Mon Jan 10, 2011 10:45 pm
by amd is the best
pilihp2 wrote:amd is the best wrote:
pilihp2 wrote:yeah, the rear diff mounts to the control arms in some sort of way from what I Remember
I probably should have just went down to the car and checked it out. I just get click happy and order lots of stuff. Thank you again, I just email them to have those removed from my order.
Just need a huge turbo now![/quote]
hahaha. I know how that is.
I've got parts sitting around that I ordered almost a year ago.
"oh I gotta have that, that should be replaced, oh don't I need one of those?"[/quote]
Haha, I know exactly what you're saying. Hopefully they get my message and don't send those extra mounts. I've also had ebrake cables brand new in my room for the 200 for over a year and just haven't got around to changing them. Worried they're going to be a pain I guess, lol.
JonathanL wrote:amd is the best wrote:
Found this on ebay UK and had to buy it (pic installed in my car):
[/quote]
This one I been wantin to get one of these before theyre all gone.[/quote]
Oh, you said DO WANT. LOL. I though you say "do you want" Oops. It's pretty bad ass and looks sick in the 200. Only problem is the horn ring on the 200 is on the clock spring and it has to be removed to use the S2 wheel, so currently I have no horn. I'll prob come up with something to get it to work though. I may have this one re-dyed too.
Re: AMD's 91 200q Project
Posted: Thu Jan 13, 2011 3:51 pm
by amd is the best
Clutch is in the mail! Went with the Clutchnet Red 2X pressure plate and Red 6 puck sprung hub. Just have to order a coolant reservoir and timing belt service parts.
Two hunj will be up and running next week if all goes well!
Re: AMD's 91 200q Project
Posted: Fri Jan 21, 2011 9:29 pm
by amd is the best
Re: AMD's 91 200q Project
Posted: Sun Jan 23, 2011 3:39 pm
by amd is the best
Re: AMD's 91 200q Project
Posted: Sun Jan 23, 2011 3:46 pm
by Frank the quattro tank
I really like this car... It is really tastefully modified, and not overdone.
Re: AMD's 91 200q Project
Posted: Sun Jan 23, 2011 4:17 pm
by loxxrider
geeze how did that happen? Launch it a lot?
Re: AMD's 91 200q Project
Posted: Sun Jan 23, 2011 4:45 pm
by Frank the quattro tank
loxxrider wrote:geeze how did that happen? Launch it a lot?
Think running no front snubber (on stock mounts) could do that?
Re: AMD's 91 200q Project
Posted: Sun Jan 23, 2011 4:54 pm
by loxxrider
hmm, I run no snubber and have stock mounts. Guess I'd better get on that
Re: AMD's 91 200q Project
Posted: Sun Jan 23, 2011 8:35 pm
by amd is the best
Frank the quattro tank wrote:[/quote]
I really like this car... It is really tastefully modified, and not overdone.
[/quote]
Thank you very much. That's pretty much how I try to keep all of my cars. Simple, clean and tastefully modded.
loxxrider wrote:geeze how did that happen? Launch it a lot?
I barely launched it ever because the clutch was way to spent to handle a launch. It broke playing in the snow actually. Mid drift in 2nd gear, caught some dry pavement and stoped moving. It's hard to make sense of it because the clutch I would have though would have been the weaker link (and just slipped). Oh well, a new one is going in with a good clutch. Hopefully it the main shaft doesn't twist like a pretzel with a good clutch in there.
Frank the quattro tank wrote:[/quote]
loxxrider wrote:geeze how did that happen? Launch it a lot?
Think running no front snubber (on stock mounts) could do that?[/quote]
I don't really think so, although it probably did not help. The trans is mated to the engine making them like one unit so the main shaft shouldn't be affected by excessive drivetrain movement...I wouldn't think.
Re: AMD's 91 200q Project
Posted: Sun Jan 23, 2011 10:40 pm
by loxxrider
yeah, thats my thoughts too
honestly, I don't notice any excessive engine movement at all with my setup so far.
Re: AMD's 91 200q Project
Posted: Mon Jan 24, 2011 6:59 am
by WOMBAT
aw man, never seen a fail like that on these motors - interesting.... but it is pretty cool that the audi rings on the grill translated onto your IC 8)
Re: AMD's 91 200q Project
Posted: Mon Jan 24, 2011 7:05 am
by amd is the best
WOMBAT wrote:aw man, never seen a fail like that on these motors - interesting.... but it is pretty cool that the audi rings on the grill translated onto your IC 8)
I've never seen or heard of a broken main shaft either. Really can't believe it with how bad the clutch was too.
I also noticed the rings on the IC, badass!
Re: AMD's 91 200q Project
Posted: Mon Jan 24, 2011 6:12 pm
by autoholic
Beautiful 200. Sits perfect. Always nice seeing these cars getting the respect they deserve.
I've heard of locker 016's breaking input shafts, usually they twist alot before breaking though. A guy that used to have that Scirocco quattro with 500HP Buick v6 hill climb car used to twist and break them. He used to say to my freind who had a 4KQ " you know your not leaving here with that input shaft"
Re: AMD's 91 200q Project
Posted: Tue Jan 25, 2011 6:32 am
by xileh
Nice car. May I ask where you got that M3 lip on the trunk?
