HPR Customer Project Car: Driving Video

AudiSport4000 · Post by **AudiSport4000** » Thu Nov 27, 2014 7:39 pm

dana wrote:put a MLS gasket with headstuds and call it a day if you want it to actually run and be reliable.

Ding...and also ensure CIS is working correctly, which is easy enough

AngryTaco · Post by **AngryTaco** » Thu Nov 27, 2014 7:41 pm

Well thats the nice thing. The cis has NEVER been messed with and the 200 runs perfect. None of that is getting messed with

AudiSport4000 · Post by **AudiSport4000** » Thu Nov 27, 2014 11:47 pm

AngryTaco wrote:Well thats the nice thing. The cis has NEVER been messed with and the 200 runs perfect. None of that is getting messed with

Well I mean if something happened to go wrong you would have NO issue troubleshooting CIS. Thats what I was getting at

40v4kq · Post by **40v4kq** » Fri Nov 28, 2014 1:18 pm

This thread needs more pics. Talk is boring.

DE80q · Post by **DE80q** » Fri Nov 28, 2014 1:30 pm

MOAR PICS!

Wilford Brimley · Post by **Wilford Brimley** » Fri Nov 28, 2014 2:23 pm

dana wrote:put a MLS gasket with headstuds and call it a day if you want it to actually run and be reliable.

I've pushed 26+psi out of a hybrid turbo on a composite HG/stock head bolts. Beat the snot out of the 190k mile 200tq daily for 15,000 miles. As long as your AFRs are in check, the risk of popping one diminishes significantly. I had AFRs set to 12.1:1, and added water/meth on top of it.

AngryTaco · Post by **AngryTaco** » Fri Nov 28, 2014 9:33 pm

Well, we're going to go back over what is going to be done on Sunday. I've been given a tight budget to adhere too so it's just a matter of what he wants done.

AngryTaco · Post by **AngryTaco** » Sun Dec 07, 2014 8:36 pm

[youtube]http://www.youtube.com/watch?v=0hEcPxXgIfk[/youtube]

AngryTaco · Post by **AngryTaco** » Sun Dec 07, 2014 8:37 pm

[youtube]http://www.youtube.com/watch?v=3WrG1nlDiTQ[/youtube]

DE80q · Post by **DE80q** » Sun Dec 07, 2014 8:51 pm

You are having a little too much fun destroying things hahaha!

chaloux · Post by **chaloux** » Sun Dec 07, 2014 8:51 pm

Please take the S out of the https:// part of the link so I don't have to go on my computer

Dutchbroracer · Post by **Dutchbroracer** » Sun Dec 07, 2014 9:04 pm

I hope you have health insurance lol

ringbearer · Post by **ringbearer** » Sun Dec 07, 2014 10:15 pm

What happens in Idaho...

AudiSport4000 · Post by **AudiSport4000** » Sun Dec 07, 2014 10:40 pm

Any updates that pertain to the "customer" car?

AngryTaco · Post by **AngryTaco** » Mon Dec 08, 2014 1:23 am

AngryTaco · Post by **AngryTaco** » Mon Dec 08, 2014 1:24 am

Wished I had one of these a LONG time ago

TERBOZZZZ

AngryTaco · Post by **AngryTaco** » Mon Dec 08, 2014 1:28 am

AudiSport4000 wrote:Any updates that pertain to the "customer" car?

I will when the engine is ready to be swapped in

AngryTaco · Post by **AngryTaco** » Mon Dec 08, 2014 12:35 pm

Also, has anyone reportedly used the JT flywheel with MC management? Do the MC flywheels have anything special on the ring gears for the sensors? Reason I ask is I have access to a fresh clutch setup meant for an MC1/WX/JT flywheel but not sure if the JT flywheel will work with the factory trigger sensors

pilihp2 · Post by **pilihp2** » Mon Dec 08, 2014 12:43 pm

JT flywheel doesnt have the trigger pin on the back side, MC needs that trigger pin.

PRY4SNO · Post by **PRY4SNO** » Mon Dec 08, 2014 9:21 pm

MOAR vids with the "incredibly stupid or drunk" guy doing shit with pneumatic assist lol

AngryTaco · Post by **AngryTaco** » Mon Dec 08, 2014 9:25 pm

pilihp2 wrote:JT flywheel doesnt have the trigger pin on the back side, MC needs that trigger pin.

Thats right. I knew I was missing something about the JT wheel. Thank Philip!

AngryTaco · Post by **AngryTaco** » Tue Dec 09, 2014 12:52 am

PRY4SNO wrote:MOAR vids with the "incredibly stupid or drunk" guy doing shit with pneumatic assist lol

Stay tuned! I foresee an axe and an HVAC box in the near future!!!

Aktapod · Post by **Aktapod** » Tue Dec 09, 2014 12:57 am

I forgot to mention: I'd be willing to pay BIG bucks for a nice, Lago blue fuel door.

AngryTaco · Post by **AngryTaco** » Tue Dec 09, 2014 12:37 pm

Aktapod wrote:I forgot to mention: I'd be willing to pay BIG bucks for a nice, Lago blue fuel door.

I have one freshly removed from the vehicle. No guarantee how the carrier will get it there though

urQ airbox and igloo arrived yesterday as well

AngryTaco · Post by **AngryTaco** » Thu Dec 18, 2014 8:37 pm

Pulled Harness today and a bunch of MISC stuff as well

HPR Customer Project Car: Driving Video

Re: HPR Customer Project Car: Found Donor Car

Re: HPR Customer Project Car: Found Donor Car

Re: HPR Customer Project Car: Found Donor Car

Re: HPR Customer Project Car: Found Donor Car

Re: HPR Customer Project Car: Found Donor Car

Re: HPR Customer Project Car: Found Donor Car

Re: HPR Customer Project Car: Found Donor Car

Re: HPR Customer Project Car: Found Donor Car

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!

Re: HPR Customer Project Car: VIDEOS AND PICZ!!!!!